Betek Aquaset®
Keep the water out
Two ready-to-use liquid waterproofing coatings that roll on like paint and set into a seamless, elastic skin over roofs, terraces, pools and walls.
600%
elongation (Aquaset)
−20…+80°C
stays elastic (Fibrous)
48 h
to dry fully
20 · 3 · 1 kg
pack sizes
Two products, one system
Aquaset covers the whole surface; Fibrous Aquaset goes where water finds its way in first: cracks, joints and corners. Used together, they make one continuous waterproof layer.
Betek Aquaset
- Coverage
- 0.75–1 kg/m² on walls · 1–1.5 kg/m² on floors
- Sizes
- 20 kg3 kg1 kg
Betek Fibrous Aquaset
- Coverage
- 0.75–1 kg/m² on walls · 1–1.5 kg/m² on floors
- Sizes
- 20 kg3 kg1 kg
Where can you use it?
On roofs and floors, protect it afterwards with screed, tiles or a similar layer.
- Flat and sloped roofs
- Terraces and balconies
- Pools and water tanks
- Gutters, eaves and chimneys
- Foundations and basement walls
- Concrete, plaster and brick
- Galvanised metal and wood
How to apply it
- 1
Clean
Dry, clean and free of grease and loose material, with at least a 5% slope so water can't pond.
- 2
Repair
Fill holes and gaps with Stako repair mortar.
- 3
Prime
One coat of Aquaset thinned 1:1 with water. Run Fibrous Aquaset in strips along the joints.
- 4
Two crossed coats
Two undiluted coats, 24 hours apart, the second at 90° to the first. Work between +5°C and +35°C.
- 5
Protect
Keep it from rain and frost for 48 hours, then cover with screed or tiles.
Planning a roof or a pool?
Any Betek agent can tell you how much Aquaset your surface needs.
