نويسه‌كه بۆ پارچه‌یێن عازلێ گه‌رمێ ب ئه‌كرلیكی ژ BETEK، ئاماده‌یه بۆ ب كار ئینانێ، هێزه‌كا زێده بۆ به‌رگرییا لێدانان و ئاڤێ هه‌یه، د شیان دا یه بۆ پێكڤه‌به‌ستنا مادده‌یێن عازل بۆ گه‌رمێ و ده‌نگی بهێته بكارئینان، وه‌ك پارچه‌یێن پۆلسترینی و پارچه‌یێن هرییا كه‌ڤری بۆ جهێن داری و ئاماده.
Betek Thermal Insulation Plaster is a cement-based, fiber-added special plaster that is used in applying white coat on thermal and sound insulation materials like polystyrene-based and rock wool plates in interior and exterior surfaces besides fixing these materials, and that increases the strength of the surface with mesh application.
Betek Coating With Silicone Thin Grain is an acrylic-based, silicone-added, patternable, ready-to-use exterior thermal insulation system coating with increased water resistance and breathability thanks to the new generation silicone technology.
Betek Coating with Silicone 2,0 mm, is an acrylic-based, silicone-added, patternable, ready-to-use exterior thermal insulation system coating with increased water resistance and breathability thanks to the new generation silicone technology.
2.5 m stainless aluminum profile. Used for protecting building corners, window and door edges against possible mechanical damage and for smoothness of the plaster layer. Packaging: 30 units - 75 m
Betek Fayfiks P-40 is a cement-based, fiber-added special plaster that is used in applying white coat on thermal and sound insulation materials like polystyrene-based and rock wool plates in interior and exterior surfaces besides fixing these materials, and that increases the strength of the surface with mesh application.
2.5 m exclusive PVC meshed dilation profiled used on plaster in horizontal and vertical joints. Tolerates displacements up to 3 cm. Offered in two different models as 180° for exterior surfaces and 90° for interior surfaces. Packaging: 25 units - 62.5 m
2.5 m PVC dropper corner profile. Used in the top edges of building openings like windows and doors. Dropper enables the water on the surface to flow directly down without penetrating into the cores of doors and windows. Packaging: 20 units - 50 m
3 m PVC joint gap profile. Used in the transitions of joint gaps on the thermal insulation plates. Saves labor and time, and prevents workmanship errors thanks to the glass-fiber mesh glued on the profile. Offered in two different models as 3 cm and 5 cm with 1.6 cm depth. Packaging: 10 units - 30 m
2.5 stainless steel subbasement profile. Used to ensure smoothness at the lower edge of thermal insulation system and create the vertical finish when required. Offered in models suitable for 3-4-5-6-7-8 cm plates. Packaging: 10 units - 25 m
BTC Thermal Insulation Adhesive is a special cement-based adhesive used for fixing sound and heat insulating materials, such as polystyrene-based panels and rock wool panels to mineral-based surfaces, such as concrete, mortar, brick and aerated concrete panels in interior and exterior spaces.
Thermal Insulation Gypsum from Betak, a special gypsum with a cement base and added fibers, is used to apply a white layer on sound and heat insulating materials, such as polystyrene-based panels or rock wool panels on interior and exterior surfaces, in addition to repairing these materials, it also increases the strength of surfaces by placing a mesh.
